Free delivery Australia-wideGST included in every priceWaterMark · GasMark certified

30 L/min for large Australian homes, multi-bathroom households and light-commercial demand.

Ginkgo G30 Continuous Flow Gas Water Heater

$1,350.00

30 L/min continuous flow gas hot water — 235 MJ/h, for 3+ bathrooms or high-demand homes.

Availability: 6 in stock

Buy nowStraight to secure checkout
SKU: GK-G30 Category:
Free delivery
Free delivery AU-wideGST includedSecure Stripe checkout
Delivery toAustralia wide
Free shipping on every order. Delivery & contact details are entered once at checkout.Delivery, installation & warranty →
WaterMark / GasMark certifiedManufacturer warranty coverAustralian-owned & supportedLicensed-installer compliantPrice includes 10% GSTTax invoice with every order
Not sure about size, fit or rebates? 1300 999 262 · Get a free quote · Compare models
✓Free delivery Australia-wide
✓Price includes GST
✓WaterMark / GasMark certified
✓Manufacturer warranty
30L/min flow
6Star efficiency
235MJ/hr input
10 yrHeat exchanger

What this solves for your home

30 L/min for large Australian homes, multi-bathroom households and light-commercial demand.  ·  Best for: Homes with three or more bathrooms, large families, frequent guests, and light-commercial sites such as small offices, clubs and shared rentals.

Everyone showers at once

With three or more bathrooms, 30 L/min keeps every shower, the kitchen tap and the laundry running at the same time. No more cold showers, no more apologising for the queue.

A gas bill you can predict

A 6-star rating means less gas for the same litres of hot water. The 235 MJ/hr burner is microprocessor-modulated, so it holds a steady 50°C or 60°C without overshooting and wasting fuel.

A heat exchanger that outlasts the mortgage

The heavy-duty oxygen-free copper heat exchanger is highly conductive and corrosion resistant - and it carries a 10/3/1-year gas warranty, alongside 3 years parts and labour and 1 year on the digital controller.

Built for an Australian winter

Integrated anti-freeze heating modules protect internal pipework when temperatures drop. The IPX4 weatherproof casing is designed for permanent outdoor wall mounting.

A cleaner swap for an old unit

Standard 3/4-inch threaded gas, cold and hot connections and a 22.0 kg wall-mount format mean most replacements are a same-day install, not a kitchen renovation.

Heat that arrives the second you turn it on

No tank, no wait, no pilot light burning all day. The burner fires the instant flow is detected and shuts off the moment you stop.

Features & engineering highlights

Every item below is a genuine engineering decision - each exists to make hot water more reliable, more efficient or easier to live with.

  • 30 L/min at a 25°C temperature rise
  • 6-star gas energy efficiency
  • 235 MJ/hr gas input rating
  • Oxygen-free copper heat exchanger
  • 10/3/1-year gas warranty
  • IPX4 weatherproof outdoor casing
  • 50°C or 60°C preset temperatures
  • 2.0 L/min low-flow ignition
  • Integrated anti-freeze protection
  • Microprocessor burner modulation
  • Flame failure & over-temp cut-off
  • Automatic pressure relief valve

Technical specifications

Verified manufacturer data, provided so you and your installer can compare like for like. Confirm the rating plate and current SKU list before ordering.

Hot water production rate30 Litres / Minute at a 25°C temperature rise (varies with inlet temperature)
Gas typeNatural Gas (NG) and LPG are separate appliance variants / SKUs; confirm the gas type on the rating plate and the current approval schedule before ordering.
Gas input rating235 MJ/hr
Star energy rating6 Stars (Ultra-High Efficiency)
Preset temperature options50°C / 60°C
Maximum water supply pressure1,000 kPa. Minimum operating pressure is being confirmed against the current Vanward technical data.
Start-up minimum water flow2.0 Litres / Minute
Power supply240V ~ 50Hz standard outlet
Ingress protectionIPX4 weatherproof casing
Connection fittings (gas, cold & hot)3/4-inch (20mm) threaded connections
Unit weight22.0 kg
Physical dimensions (H × W × D)566 mm × 373 mm × 240 mm
Warranty periods (separate)10 years heat exchanger · 3 years parts and labour · 1 year digital controller
CertificationIAPMO GasMark, lead-free WaterMark, AS/NZS plumbing approval

What to expect on installation day

Good preparation makes for a clean, fast install. Here is what your property needs.

Wall mount, outdoors

The IPX4 weatherproof casing is designed for permanent external installation on an outside wall, ideally with a roof or overhang above the unit.

Standard 3/4-inch connections

Gas, cold water and hot water connections are all 3/4-inch (20mm) threaded - the standard Australian size, so existing pipework usually connects straight up.

Up to 1000 kPa mains pressure

Suitable for normal Australian mains water pressure. A pressure limiting valve is recommended where local pressure exceeds 1000 kPa.

240V power required

The unit needs a standard 240V ~ 50Hz outlet for the electronic controls and fan. Your installer will confirm the closest suitable outlet.

Licensed gas fitter only

Gas work must be carried out by a licensed tradesperson with the correct endorsements. Unlicensed installation is unlawful and may void the warranty.

Frequently asked questions

The questions Australian buyers and installers ask us most often about this system.

How much hot water does the G30 actually provide?

The G30 is rated at 30 litres per minute with a 25°C temperature rise - the Australian standard test condition, which assumes incoming water at 25°C. In a cold-climate winter your incoming water is colder, so the same gas input delivers a lower flow at the same outlet temperature. Your installer will size the unit against your household pattern and local inlet water temperature.

Is the G30 suitable for a house with three or four bathrooms?

Yes - that is exactly what it is designed for. A single shower and a kitchen tap together draw roughly 20 L/min, so 30 L/min comfortably supports two showers running at once, or three showers used back to back, with headroom for the laundry.

Does the G30 run on both natural gas and LPG?

Yes. The G30 is factory set for either LPG or natural gas, and your licensed gas fitter will confirm the correct gas type for your property before commissioning. If you change gas supply type later, the unit requires conversion by an approved installer.

How long does installation take?

For a straightforward replacement of an existing unit with 3/4-inch connections already in place, most licensed gas fitters complete the swap in a few hours. New installations including a gas supply upgrade or a new hot water line will take longer.

Supply only. Ginkgo Australia supplies the appliance. Installation, replacement and any site works are not included and must be carried out by a licensed tradesperson in line with the manufacturer’s instructions and Australian Standards. All prices are recommended retail prices including GST, in Australian dollars. See the full buying guide.
Need a hand choosing the right size?

We will match a model to your household and put you in touch with a licensed installer.

At a glance

30 L/min for large Australian homes, multi-bathroom households and light-commercial demand.

Best for: Homes with three or more bathrooms, large families, frequent guests, and light-commercial sites such as small offices, clubs and shared rentals.

  • 6-star efficiency
  • 235 MJ/hr gas input
  • Low NOx, copper exchanger

Full technical specifications, buying considerations, installation requirements and FAQs are laid out on this page below.

Weight 27 lbs

Delivery, installation & warranty

  • Equipment only - supply, not installation: Ginkgo Australia supplies the appliance. You arrange installation with your own licensed gas fitter (gas models) or licensed electrician and plumber (heat pump). Installation, replacement and site works are not included in the price.
  • Licensed installation is a legal requirement: Gas and electrical work must be carried out by a licensed tradesperson with the correct endorsements in every state and territory. DIY or unlicensed installation is unlawful, may void the warranty, prevents STC certificates, and is a serious safety risk.
  • Free delivery Australia-wide, GST included: All prices are recommended retail prices in Australian dollars, GST included. Orders are processed within 1-2 business days and shipped with a national carrier; standard delivery is typically 2-7 business days after dispatch depending on your state. Remote, island and PO Box addresses are confirmed with you before shipping.
  • Warranty & STC eligibility: Gas: 10-year heat exchanger, 3-year parts & labour, 1-year controller. Heat pump: 5-year comprehensive parts & labour. STC rebates apply to heat pumps only, by model and zone, and are created by an accredited installer at the time of installation - they are not included in the price.
  • Check the site before you order: Confirm wall space or floor area, clearances, the gas point or electrical circuit, drain and water pipework against the installation manual before your tradesperson arrives. A tax invoice is issued with every order.

Read the full buying & ordering guide →

Reviews

There are no reviews yet.

Be the first to review “Ginkgo G30 Continuous Flow Gas Water Heater”

Your email address will not be published. Required fields are marked *

Scroll to Top