Free delivery Australia-wideGST included in every priceWaterMark · GasMark certified
Home/FAQ/Choosing a model
FAQ · Choosing a model

Choosing the right model

Sizing guidance for the gas continuous-flow and heat pump ranges.

7 questions answered Updated October 2026 Adelaide, South Australia
01What is the difference between the G22, G26 and G30?

They are the same 6-star continuous-flow gas platform at three flow rates. Pick by how many hot water outlets you need to run at the same time:

  • G22 — 22 L/min, $995 — one bathroom, 1–2 people, apartment or townhouse.
  • G26 — 26 L/min, $1,080 — one or two bathrooms, a couple or small family.
  • G30 — 30 L/min, $1,350 — two or three bathrooms, busy family or small business.

All three are 6-star and carry a 10/3/1-year gas warranty.

02Should I buy gas or a heat pump?

It comes down to the fuel you have and how the unit is installed:

  • Continuous-flow gas (G22/G26/G30) — instant hot water, no storage tank, smallest footprint. Needs a gas supply and a licensed gas fitter. Not STC eligible.
  • All-in-one heat pump (G270/G300/G330) — stores 270–330 litres, runs on electricity, works in a home without gas, uses up to an estimated 75% less energy (published COP 5.4, test conditions pending confirmation; 42 dB(A) sound pressure), and is STC eligible by model and zone (estimate dated 9 Nov 2026). Needs a suitable location, a licensed electrician and a licensed plumber.

If you’re unsure, request a free quote and describe your property — we’ll point you to the right range.

03Which heat pump model do I need — G270, G300 or G330?

Choose on household size and simultaneous demand:

  • G270 — 270 L, $3,350 — 1–2 people, one or two bathrooms.
  • G300 — 300 L, $3,500 — 3–4 people, two or three bathrooms.
  • G330 — 330 L, $3,650 — 4 or more people, larger households, small business or light commercial.

All three are WaterMark certified (WM-026973, AS 3498:2020), certified to AS/NZS 2712:2007 (StandardsMark SMK41550) and AS/NZS 60335.2.40 under SAA approval SAA-261138-EA (RCM), a published COP of 5.4 (test conditions pending confirmation) and 42 dB(A) sound pressure.

04What does the 6-star rating mean?

It’s the Australian gas water heater star rating under AS/NZS 2913.2. Six stars is the highest rating available and means a high hot water delivery rate for the gas consumed — lower running costs for the same amount of hot water.

05What does the gas input rating (for example 175 MJ/hr) mean?

It’s the hourly energy input of the burner. A higher input means faster heat recovery, which matters if you’re running several outlets at once. Your licensed gas fitter will confirm the gas supply is adequate for the model you choose.

06Will these units work in my area and climate?

Yes — the range is certified for Australian conditions and tested from around −7°C winter mornings to 47°C summer afternoons. Gas models need a gas supply and an approved position per the installation manual; heat pumps need a suitable spot out of direct winter sun and away from driving rain. Your installer confirms the final siting.

07Do I need extra items such as a tempering valve or recirculation pump?

Some homes need a tempering valve, a recirculation pump or additional relief and isolation valves to meet AS/NZS 3500 and the installation manual. These are not supplied with the unit unless ordered separately — your licensed installer will tell you what your property needs and can order them through us.

Still need help?

Real people, real answers — Adelaide based, Monday to Friday.

Other FAQ topics

Browse all FAQs →

Ready to buy or need a hand choosing?

Buy your Ginkgo system online at the recommended retail price (incl. GST) and arrange licensed installation yourself — or get a free, no-obligation quote and we’ll size it for you.

Scroll to Top