Free delivery Australia-wideGST included in every priceWaterMark · GasMark certified

The Australian family favourite. 26 L/min for two to three bathrooms, with no cold run-out.

Ginkgo G26 Continuous Flow Gas Water Heater

$1,080.00

26 L/min continuous flow gas hot water — 198 MJ/h, ideal for 2–3 bathrooms. Natural Gas & LPG compatible.

Availability: 9 in stock

Buy nowStraight to secure checkout
SKU: GK-G26 Category:
Free delivery
Free delivery AU-wideGST includedSecure Stripe checkout
Delivery toAustralia wide
Free shipping on every order. Delivery & contact details are entered once at checkout.Delivery, installation & warranty →
WaterMark / GasMark certifiedManufacturer warranty coverAustralian-owned & supportedLicensed-installer compliantPrice includes 10% GSTTax invoice with every order
Not sure about size, fit or rebates? 1300 999 262 · Get a free quote · Compare models
✓Free delivery Australia-wide
✓Price includes GST
✓WaterMark / GasMark certified
✓Manufacturer warranty
26L/min flow
6Star efficiency
198MJ/hr input
2-3Bathrooms

What this solves for your home

The Australian family favourite. 26 L/min for two to three bathrooms, with no cold run-out.  ·  Best for: Typical Australian family homes with two to three bathrooms, a busy kitchen and a laundry.

No more cold run-out

A storage tank is empty right after the morning rush, and the last person in gets cold water. The G26 has no tank at all - hot water is generated the moment you turn the tap.

Stop paying to heat water nobody is using

With a storage system you pay to keep 150-200 litres hot around the clock, every day, whether you are home or not. A continuous flow unit only burns gas when hot water is actually drawn.

Two showers, one morning, no drama

26 L/min handles two showers and a sink tap running together - the everyday reality of a family getting ready at the same time.

A quieter, smaller footprint on the wall

At 19.3 kg in a slim wall-mount format, the G26 frees up the space a storage tank and its pipework would have occupied.

Set your temperature once and forget it

Choose 50°C for safe general use or 60°C for a hotter delivery, and the microprocessor controller holds it there within a fraction of a degree.

Ready for solar pre-heat

Install in a solar pre-heat configuration and use free solar-collected heat to offset your gas use further through the year.

Features & engineering highlights

Every item below is a genuine engineering decision - each exists to make hot water more reliable, more efficient or easier to live with.

  • 26 L/min at a 25°C temperature rise
  • 6-star gas energy efficiency
  • 198 MJ/hr gas input rating
  • Oxygen-free copper heat exchanger
  • 10/3/1-year gas warranty
  • IPX4 weatherproof outdoor casing
  • Solar pre-heat compatible
  • 50°C or 60°C preset temperatures
  • 2.0 L/min low-flow ignition
  • Integrated anti-freeze protection
  • Compact 19.3 kg wall-mount format
  • Wired controller - inclusion / option status to be confirmed

Technical specifications

Verified manufacturer data, provided so you and your installer can compare like for like. Confirm the rating plate and current SKU list before ordering.

Hot water production rate26 Litres / Minute at a 25°C temperature rise (varies with inlet temperature)
Gas typeNatural Gas (NG) and LPG are separate appliance variants / SKUs; confirm the gas type on the rating plate and the current approval schedule before ordering.
Gas input rating198 MJ/hr
Star energy rating6 Stars (Ultra-High Efficiency)
Preset temperature options50°C / 60°C
Maximum water supply pressure1,000 kPa. Minimum operating pressure is being confirmed against the current Vanward technical data.
Start-up minimum water flow2.0 Litres / Minute
Power supply240V ~ 50Hz standard outlet
Ingress protectionIPX4 weatherproof casing
Connection fittings (gas, cold & hot)3/4-inch (20mm) threaded connections
Unit weight19.3 kg
Physical dimensions (H × W × D)571 mm × 394 mm × 166 mm
Warranty periods (separate)10 years heat exchanger · 3 years parts and labour · 1 year digital controller
CertificationIAPMO GasMark, lead-free WaterMark, AS/NZS plumbing approval

What to expect on installation day

Good preparation makes for a clean, fast install. Here is what your property needs.

Wall mount, outdoors

The IPX4 weatherproof casing is designed for permanent external installation on an outside wall, ideally with a roof or overhang above the unit.

Standard 3/4-inch connections

Gas, cold water and hot water connections are all 3/4-inch (20mm) threaded - the standard Australian size, so existing pipework usually connects straight up.

Up to 1000 kPa mains pressure

Suitable for normal Australian mains water pressure. A pressure limiting valve is recommended where local pressure exceeds 1000 kPa.

240V power required

The unit needs a standard 240V ~ 50Hz outlet for the electronic controls and fan. Your installer will confirm the closest suitable outlet.

Wired controller

A wired controller lets you set temperature and check status from inside the home - useful for units mounted in a hard-to-reach position. Whether it is supplied with the unit or is an optional accessory is being confirmed against the current parts list.

Licensed gas fitter only

Gas work must be carried out by a licensed tradesperson with the correct endorsements. Unlicensed installation is unlawful and may void the warranty.

Frequently asked questions

The questions Australian buyers and installers ask us most often about this system.

Is the G26 big enough for a three-bathroom house?

For three bathrooms used at the same time, we recommend stepping up to the G30. The G26 is designed for two to three bathrooms in a typical household - two showers can run at once with headroom for a tap, but it is right at its limit with three showers running simultaneously.

Can the G26 be used with a solar hot water system?

Yes - the G26 is solar pre-heat compatible. In a solar pre-heat arrangement, a solar collector delivers pre-heated water to the unit, offsetting part of the gas consumption. Your installer will confirm the pipework routing and the tempering valve arrangement your system needs.

What is the difference between the G26 and the G30?

Flow rate and gas input: 26 L/min at 198 MJ/hr versus 30 L/min at 235 MJ/hr. Both are 6-star and share the same copper heat exchanger and 10/3/1-year warranty. Choose by how many outlets run at once, not by house size alone.

How long does installation take?

For a straightforward replacement of an existing unit where 3/4-inch connections are already in place, most licensed gas fitters complete the swap in a few hours.

Supply only. Ginkgo Australia supplies the appliance. Installation, replacement and any site works are not included and must be carried out by a licensed tradesperson in line with the manufacturer’s instructions and Australian Standards. All prices are recommended retail prices including GST, in Australian dollars. See the full buying guide.
Need a hand choosing the right size?

We will match a model to your household and put you in touch with a licensed installer.

At a glance

The Australian family favourite. 26 L/min for two to three bathrooms, with no cold run-out.

Best for: Typical Australian family homes with two to three bathrooms, a busy kitchen and a laundry.

  • 6-star efficiency
  • 198 MJ/hr gas input
  • Solar pre-heat compatible

Full technical specifications, buying considerations, installation requirements and FAQs are laid out on this page below.

Weight 24 lbs

Delivery, installation & warranty

  • Equipment only - supply, not installation: Ginkgo Australia supplies the appliance. You arrange installation with your own licensed gas fitter (gas models) or licensed electrician and plumber (heat pump). Installation, replacement and site works are not included in the price.
  • Licensed installation is a legal requirement: Gas and electrical work must be carried out by a licensed tradesperson with the correct endorsements in every state and territory. DIY or unlicensed installation is unlawful, may void the warranty, prevents STC certificates, and is a serious safety risk.
  • Free delivery Australia-wide, GST included: All prices are recommended retail prices in Australian dollars, GST included. Orders are processed within 1-2 business days and shipped with a national carrier; standard delivery is typically 2-7 business days after dispatch depending on your state. Remote, island and PO Box addresses are confirmed with you before shipping.
  • Warranty & STC eligibility: Gas: 10-year heat exchanger, 3-year parts & labour, 1-year controller. Heat pump: 5-year comprehensive parts & labour. STC rebates apply to heat pumps only, by model and zone, and are created by an accredited installer at the time of installation - they are not included in the price.
  • Check the site before you order: Confirm wall space or floor area, clearances, the gas point or electrical circuit, drain and water pipework against the installation manual before your tradesperson arrives. A tax invoice is issued with every order.

Read the full buying & ordering guide →

Reviews

There are no reviews yet.

Be the first to review “Ginkgo G26 Continuous Flow Gas Water Heater”

Your email address will not be published. Required fields are marked *

Scroll to Top